SAFETY ON/OFF LIGHT
Date: 09-28-2001
I hope by the time you are reading this Sherline has already incorporated this modification into their production models.
Attach a 110v light directly to LARGE L1 and L2 (not small l1 and l2). That's it. Now when the lathe or mill is ON you will have a light to let you know. Quick, cheap, and most importantly, SAFE.
Touching SMALL l1 and l2 causes the spindle to shut off!! CHECK IT OUT HERE
- Very easy to leave ON with the speed control setting at low thinking it is OFF.
- Found myself changing tools with the equipment ON!
- Adding an indicator light is very easy.
Attach a 110v light directly to LARGE L1 and L2 (not small l1 and l2). That's it. Now when the lathe or mill is ON you will have a light to let you know. Quick, cheap, and most importantly, SAFE.
Touching SMALL l1 and l2 causes the spindle to shut off!! CHECK IT OUT HERE
- Also the ESC is made by KB Electronics
- 110 volt indicator light
- Drill a hole in the plastic case
- Connect the wires to BIG L1 and L2