Auto Spindle On/Off
- CNC4PC - C15 Dual Relay Board
- Can control 2 outputs
- Easy setup and cheap
- Connecting small l1 and l2 causes the spindle to turn off
Sherline ESC
G-Code Setup
G04
M03
M03 (spindle turns on)
G04 P2500 (gives 2.5 sec for spindle to spool up)
- Dwell (this is the time the machine will take a pause)
- Works in milliseconds
- G04 P2500 = Pause for 2.5 seconds
M03
- Turns on spindle
M03 (spindle turns on)
G04 P2500 (gives 2.5 sec for spindle to spool up)
