Protech Shogun 400
Date: 8-2004
Heli: Shogun 400 (same as Zoom and Dolphin)
Motor: Himax 2020-4200 Brushless from
Transmitter: JR 8103 FM w/ Breg-5 DPS II Receiver
Pinion: 9T
Servos Cyclic: Hitec HS-55; Tail: Hitec HS-50
Gyro: Futaba GY-240
Battery: 3S Li-Poly 1200 or 1500 mAh
Blades: Helihobby woodies
ESC: Castle Creation Phoenix 25
Charger: Apache 2500
Connector: Deans mini-connector
Modifications: Belt Drive Setup
Motor: Himax 2020-4200 Brushless from
Transmitter: JR 8103 FM w/ Breg-5 DPS II Receiver
Pinion: 9T
Servos Cyclic: Hitec HS-55; Tail: Hitec HS-50
Gyro: Futaba GY-240
Battery: 3S Li-Poly 1200 or 1500 mAh
Blades: Helihobby woodies
ESC: Castle Creation Phoenix 25
Charger: Apache 2500
Connector: Deans mini-connector
Modifications: Belt Drive Setup
|
|
Bought June 15, 04; My 30th birthday present :)
6-20 SHE FLIES!! But just a little. I can't keep the one pinion gear from coming loose. Thanks Rick for giving me a pinion gear
6-24 Burned out the tail gear coming off he motor :(
6-27 My good friend, Rick C., to the rescue! He had an extra gear and gave it to me. 5 min flight today with tail twitches.
6-29 My pitch plate pin popped out but luckily I wasn't to high. The bellcrank flipped over and bent the tail shaft.
8-8 Belt Driver is a Success!!!!
12-27 Back up! Roll rate is still slow but the elevator is quick.
6-20 SHE FLIES!! But just a little. I can't keep the one pinion gear from coming loose. Thanks Rick for giving me a pinion gear
6-24 Burned out the tail gear coming off he motor :(
6-27 My good friend, Rick C., to the rescue! He had an extra gear and gave it to me. 5 min flight today with tail twitches.
6-29 My pitch plate pin popped out but luckily I wasn't to high. The bellcrank flipped over and bent the tail shaft.
8-8 Belt Driver is a Success!!!!
12-27 Back up! Roll rate is still slow but the elevator is quick.
