ELECTRIC SETUP
Date 12-0-12
I wired the 2 transformers in series using 24 volts from one and 12 from the other. After the bridge and capacitor you can see the voltage is at 52V. My motors are 2.1 volt each so that is Just shy of the max 25 times motor voltage! Below trying NEMA 23 motors from my Sherline Mill to make sure the setup works.
- 10 Amp transformer
- 400V 35Amp bridge
- 3.5" 120V fan
- 20,000uF 75V capacitor
I wired the 2 transformers in series using 24 volts from one and 12 from the other. After the bridge and capacitor you can see the voltage is at 52V. My motors are 2.1 volt each so that is Just shy of the max 25 times motor voltage! Below trying NEMA 23 motors from my Sherline Mill to make sure the setup works.
